Before.. Drivers side looking backwards
Step 1 -make paper stencil -real pain, takes ages..
Step 2, using smooth surface board [I used hardboard] trace outline from
paper stencil.
# Tip - Use marker pen, ink is absorbed into resin and you can easily trim to
shape.
Layup GRP, I used 3 layers of fibreglass and a stipple roller.
Step 3. Once the resin has started to harden but not cured [called green]
peel off from the board. You then have the GRP panel. You can see the shape from
the marker pen which has been absorbed into the resin. It's then easy to trim.
Step 4. Place panel into position and using strips of fibreglass fix into place.